If you need a more secure way to hang framed artwork, this Picture Frame Security Hanging Kit is a simple and practical solution. Designed for a two-point wall fixing, it helps keep picture frames, mirrors and canvases more secure on the wall, reduces the risk of accidental knock-offs, and makes casual removal much more difficult once installed.

The system works by fixing two metal security plate hangers to the back of the frame, one on each side. Two screws are then installed into the wall, and the frame is lowered onto them before being slid slightly sideways into the locking groove. It is a neat, effective option for framed prints, artwork, mirrors and canvases where extra stability and security matter.

Picture Frame Security Hanging Kit Features:

• Two-point security design: Uses two plate hangers to create a more secure and stable wall hanging method.
• Helps deter easy removal: Once the frame is slid into position, it becomes much harder to remove without knowing how the system works.
• Added frame safety: Helps reduce the chance of frames being knocked off the wall in busy areas.
• Suitable for many frame types: Can be used for pictures, framed artwork, mirrors and canvases.
• Simple to install: Easy to measure, line up and fit using two wall screws.
• Handy for repeat installs: If you are hanging multiple same-size frames, you can make a simple template for faster positioning.

Specifications

• Product type: Security hanging system for picture frames
• Hanger style: Two-point grooved metal plate hangers
• Application: Suitable for framed pictures, artwork, mirrors and canvases
• Mounting method: Frame slides onto two wall screws and locks into a grooved channel
• Installation note: Screw heads should sit slightly proud of the wall so they can engage correctly with the plate hanger grooves
• What’s included: 2 x security plate hangers
• Screws: Not included

A good hanging system does more than hold a frame up. It helps keep your wall display tidy, secure and better protected in spaces where frames may be bumped, moved or handled.

How to Install the Picture Frame Security Hanging Kit

This security hanging kit is simple to use once you understand the two-point locking method. Follow these basic steps for a neat and secure wall installation.

1. Attach the plate hangers to the back of the frame. Fix one security plate hanger to each side of the frame, positioning them about one third of the way down from the top and making sure both are aligned evenly at the same height.
2. Mark the wall fixing points. Measure the distance between the two plate hangers and transfer these positions carefully onto the wall.
3. Install the wall screws. Insert two suitable screws into the wall, leaving the heads sitting slightly proud so they can engage with the grooves in the plate hangers.
4. Hang the frame onto the screws. Lower the frame onto both screw heads so the plate hangers sit in place.
5. Slide the frame sideways to lock it in. Move the frame slightly left or right until the screws engage in the locking groove of each hanger.
6. Check the frame is secure. Make sure the frame is sitting level and that it cannot be lifted off directly without sliding it back out of position.

Tip: If you are hanging several frames of the same size, making a simple template can save time and help keep your wall layout neat and consistent.